ball mount adapter
This 1" (2.5 cm) BALL MOUNT ADAPTER will be attached to the housing with 1/4-20 stainless steel socket head cap screw. Adapter is made from corrosion resistant anodized aluminum and comes with Stainless Steel Washers.
Appropriate bulkhead connector (1/2x20; M12; M14; M15; M16)
1 metal and 1 plastic protective cap
Cold shoe ball mount
|Equinox||Sea & Sea|
|Light & Motion||Subal|
Underwater camera Nauticam Sony RX100 with DNC-7A(H1) monitor
Compact, rugged, safe design. The monitor guarantees NEMA 6 (IP 68). Strong and lightweight aluminum shell, over hard anodized coating, two layers of the special paint, resistant to salt water, a perfect tool for professional underwater photography. The monitor is sealed and cannot be taken apart or opened. You will never get water or sand inside, or have to worry about properly sealing the monitor after charging it.
The set includes a detachable mount adapter, allowing the underwater monitor to be tilted and rotated, with 1" ball on the end.
Binding T-slots on the top and bottom allow convenient connection with underwater housings and arms. It is useful for lighting or an external microphone.
We have bulkhead connectors (fittings) for all brands of the housings. To chose your Bulkhead, see our Connectors production line. Custom length and other HDMI connector types are available.
All of our bulkhead connectors have water blocks and are open face pressure rated to 150 PSI (100 meters).
On the picture, M16 bulkhead with right angle Mini HDMI connector (Type C) on the end, for Aquatica, Amphibico, Nauticam, Aquatica housings, Canon cameras, Panasonic GH4
We have also custom made HDMI Right Angle bulkhead connector (Elbow connector) for a hole with a diameter of 0.5".
This connector was installed on Light & Motion Bluefin Housing on the front plate of the housing.
Option 1 (standard)
Built-in rechargeable Li-Ion battery with Battery Status Indicator shows the power level of the battery. The flashing mode tells you when the battery needs charging. The charger is capable of 110V-240V input, allowing it to be plugged into power outlets in a number of countries.
The Check button on the monitor turns on a LED display showing the battery charge level. Continuous run time of HDMI version - 5 hours. Recharging time of the battery - 3.5 hours.
No battery inside. Power for the monitor is going through the separate cable from your own power source (DC 7.5 ~ 18V).
Power consumption of the monitor: ≦7.3W
Custom power configuration.Top
The Switch Guard design of the power button protects the monitor from self-activation during transportation.
All push buttons made are from non-corrosive steel.
100 ft / 30 m underwater cable with DNC male and HDMI type A connectors
100 ft / 30 m underwater HDMI extension cable with waterproof connector from one end and HDMI (male type A) connector from other end (top side). Guarantees NEMA 6 (IP 68). This cable is designed to ensure a perfect transfer of HDMI signal to any HDMI source (TV; HDMI recorder, etc). Depth rating: 92 ft / 28 m
37 ft / 11 m underwater HDMI cable with DNC connectors
37 ft / 11 m underwater HDMI extension cable with male and female connectors. This cable is designed to ensure a perfect transfer of HDMI signal to our HDMI monitor from your underwater housing. The cable works only with Dive And See underwater HDMI connectors. Convenient in shallow water, such as swimming pools, Waterproof / underwater Telescoping Extension Pole for GoPro. Depth rating: 316 ft / 95 m
32 ft / 10 m underwater cable with DNC male and HDMI type A connectors
37 ft / 11 m underwater HDMI extension cable with waterproof connector from one end and HDMI (male type A) connector from other end (top side). Guarantees NEMA 6 (IP 68). This cable is designed to ensure a perfect transfer of HDMI signal from underwater camera (Canon cameras, Panasonic GH4, GoPro 4) to any HDMI source (LCD monitors; HDMI recorder: etc). Depth rating: 33 ft / 10 m
HDMI extension cable female type C to male type A
Mini HDMI right angle cable
Being a manufacturer allows us to provide custom variations (1/2x20; M12; M14; M15; M16; etc) of the underwater bulkhead connectors for HDMI signal. The are compatible with many video and DSLR housings (see the chart). All of our bulkhead connectors have water blocks and are open face pressure rated to 150 PSI. Our bulkhead connectors fit into existing free ports in your housing and are easy to install. Custom length and other connector types are available.
Peaking filter Camera - Photography mode. Using 5D2 or 550D and other similar camera,
Pixel to Pixel Contrast
Screen marker Saturation
Check Field Tint
False colors Sharpness
Histogram Color Temp
Scanning mode Picture Mode
Center marker Aspect Ratio
Segmentation Image Flip
Zoom H/V delay
All Dive and See monitors are developed, manufactured, and assembled in the USA.