Completely manufacture sealed design eliminate one most common problem – leakage of the equipment after open close procedure. DNC-7 is the monitor with resolution 800x400, LCD panel with 450 nits brightness, wide view angle allowed to see the color-critical picture without color distortion and contrast ratio 500:1.
Compact, rugged, safe design. The monitor guarantees NEMA 6 (IP 68) Strong and lightweight anodized aluminum shell resistant to salt water, designed to withstand extreme environments. The monitor is sealed and cannot be taken apart or opened. You will never get water or sand inside, or have to worry about properly sealing the monitor after charging it. Body of monitors made from marine grade aluminum with hard anodizing treatment. Tom Campbell used DNC-7 monitor wit Nauticam NA-DCES Underwater Housing for RED Epic camera.
Design of the monitor allow to use above water as well
The set includes a detachable Ball mount adapter, allowing the underwater monitor to be tilted and rotated, with 1" ball on the end. Ball mount allows for the underwater photographers to mount a monitor on top of their housings.
Binding V-slots on the top and bottom allow convenient connection with underwater housings and arms. It is useful for lighting, an external microphone, buoyancy compensator device.
There is 1/4-20 threaded hole on the top and bottom for accessories.
The DNC-7 has a detachable HDMI cable for a quick connection with a bulkhead connector on the housing. The unpluggable cable is convenient for transportation. We have bulkhead connectors (fittings) for all brands of the housings. Aquatica, Amphibico, Equinox, Hugyfot, Ikelite, Light & Motion, Nauticam, Nexus, Sea & Sea, Seacam, Sealux, Subal. All of our bulkhead connectors have water blocks and are open face pressure rated to 150 PSI (100 meter). Our bulkhead connectors fit into existing free ports in your housing and are easy to install. Custom length and other HDMI connector types are available.
SWITCH PROTECTORThe Switch Guard design of the power button protects the monitor from self-activation during transportation. All push buttons made are from non-corrosive steel.
Top
POWER AND CHARGING
Built-in rechargeable Li-Ion battery with Battery Status Indicator shows the power level of the battery. The flashing mode tells you when the battery needs charging. The charger is capable with 110V-240V input, allowing it to be plugged into power outlets in a number of countries. One charge of the battery allows to use continius monitor during 4 hours. Battery recharge time - 1
The Check button on the monitor turns on an LED display showing the battery charge level.
FUNCTION BUTTONSEasily navigable, all the functions are accessible through the body of the monitor, which is convenient for underwater photography.
INPUT:
Composite, PAL - 4.43; NTSC – 3.58
RESET (revert back to factory settings)
Display Ratio: 16:9/4:3
Left/right Rotation
Up/down Rotation
10 languages
Horizontal Position
Vertical Position
OSD Timeout
Level of transparency
CONTRAST
BRIGHTNESS
Top
Screen Size- Diagonal: 7" (16:9)
Display panel: LED TFT-LCD
Resolution: 1,152,000 pixels
Physical Resolution: 800 x 480
Video signal input: 0.7 ~ 1.4Vp-p/75Ω
Signal input: HDMI
Supports Resolution: 1920i/p x 1080i/p
View Angle: 50/70 (U/D), 70/70 L/R)
Brightness: 450 cd/m2
Contrast Ratio: 500:1
Depth Rating: 197 ft / 60 m
Weight: 2.76 lbs. / 1.25 kg
Size: 7.3 x 5.4 x 2.1 inch / 185 x 138 x 53 mm
Voltage: DC12V±10%
Buoyancy: negative 240 g in fresh water
Battery Life: 4 hours, continuous.
Battery recharge time: 1h 30min
Top
