COLD SHOE BALL MOUNT
COLD SHOE BALL MOUNT connecting to all Dive And See monitors. Ball mount made from corrosion resistant anodized aluminum and comes with Stainless Steel Washer and 1/4-20 cold shoe plate.
DNC-7A(S2) underwater broadcast quality SDI monitor with HD-SDI Input and Output, works seamlessly with Sony PXW-Z100, Blackmagic Cinema Camera. Neutrally buoyant.
Wide view angle allowed to see the color-critical picture without color distortion. The monitor have full menu access, battery status indicator and 4 user configurable push buttons, allowed user for quick access without scrolling through the menu. A large, bright external monitor gives you the ability to frame your shots and focus with great precision, the flexibility to swivel and tilt to any angle, and fits practically any housing, underwater camera.
The set includes:
Appropriate bulkhead connector M16 (custom bulkhead available)
1 metal and 1 plastic protective cap
Cold shoe ball mount
DNC-7A(S2) allowed user to monitoring the filming and feed the SDI signal to another source such a external recorder or film director monitor. SDI cable sold separately.
|Equinox||Sea & Sea|
|Light & Motion||
Compact, rugged, safe design. The monitor guarantees NEMA 6 (IP 68) Strong and lightweight hard anodized aluminum shell resistant to salt water The monitor is sealed and cannot be taken apart or opened. You will never get water or sand inside, or have to worry about properly sealing the monitor after charging it.Top
The set includes a detachable mount adapter, allowing the underwater monitor to be tilted and rotated, with 1" ball on the end.
Binding T-slots on the top and bottom allow convenient connection with underwater housings and arms. It is useful for lighting or an external microphone.
All of our bulkhead connectors have water blocks and are open face pressure rated to 150 PSI (100 meter)
M16 bulkhead with BNC connector on the end.
Built-in rechargeable Li-Ion battery with Battery Status Indicator shows the power level of the battery. The flashing mode tells you when the battery needs charging. The charger is capable with 110V-240V input, allowing it to be plugged into power outlets in a number of countries.
The Check button on the monitor turns on an LED display showing the battery charge level. Continuous run time of SDI version - 4 hours.Recharging time of the battery - 3.5 hours.
No battery inside. Power for the monitor is going through the separate cable from your own power source (DC 7.5 - 18V). Power consumption of the monitor: ≦8.5W
Custom power configuration.Top
The Switch Guard design of the power button protects the monitor from self-activation during transportation.
All push buttons made are from non-corrosive steel.
328 ft / 100 m underwater HD-SDI cable
328 ft / 100 m underwater, high quality coax cable, designed to ensure a perfect transfer of HD-SDI 4.5GHz signal (support 3G). The strain relief allows the cables to move without cracking and breaking. Custom length and other connector types are available
This bulkhead connectors fit into M16 threaded port (or 16mm opening) in your housing and are easy to install. Being a manufacturer allows us to provide custom variations (1/2x20; M12; M14; M15; etc) of the underwater bulkhead connectors for HD SDI signal. . All of our bulkhead connectors have water blocks and are open face pressure rated to 230 PSI. Custom length and other connector types are available.
50 m Underwater Surface HD-SDI cable
165 ft / 50 m underwater, high quality coax cable, designed to ensure a perfect transfer of HD-SDI signal (support 3G). The strain relief allows the cables to move without cracking and breaking. Custom length and other connector types are available.
Peaking filter Camera - Photography mode. Using 5D2 or 550D and other similar camera,
Pixel to Pixel Contrast
Screen marker Saturation
Check Field Tint
False colors Sharpness
Histogram Color Temp
Scanning mode Picture Mode
Center marker Aspect Ratio
Segmentation Image Flip
Zoom H/V delay