DNC-2040, 3G SDI waterproof bulkhead connector for Underwater Video housing Subal FS7 (Sony PXW-FS7 XDCAM Super 35 Camera System), designed to install an HD SDI output for external monitor, recorder, or connect to external SDI cable DNC-1062 up to 50 meters. Bulkhead connector fits M14x1 threaded port of the Subal FS7 housing. Bulkhead designed to ensure a perfect transfer of HD-SDI 4.5 GHz signal (support 3G).

Perfectly works with Composite Analog Video signal.

Bulkhead connector has water block, which is allowing to keep vacuum inside of your underwater housing, operation depth -  240 PSI (160 meters).

The length of the coaxial cable or other types of BNC connectors is available.

DNC-2039, is a bulkhead connector, with Ethernet Cat5e and 3G SDI coaxial cable gives you the capability to transmit SDI signal 1080p60 from underwater camera and control over Cat5e (four twisted pairs 24 AWG Solid copper) your camera or other electronics devices. Applications: IP cameras (RS-485), security cameras, when you need send Power Over Ethernet cable; To send LANC commands from your PC to the camera (RS-232 port). DNC-2039 support SMPTE 424M standard, with 2.970 Gbit/s, and 2.970/1.001 Gbit/s bitrates of 1080p60 video format. These underwater bulkhead connectors fit into M16x1.5 threaded port or 0.625" (16mm) hole through, NOT for M16x1, and have built in water block, which is allowing to keep vacuum inside of your underwater housing, depth - 240 PSI (160 meters). Bulkhead connector compatible with cable DNC-1041

DNC-2036, 3G SDI bulkhead connector with flexible coaxial cable, is used for facilitating the transmission of high definition (HD) video signal within and between underwater systems and for interfacing HD video based equipment such as telemetry systems, high speed cameras, broadcast SDI cameras. Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing, depth -  240 PSI (160 meter). DNC-2036 is designed to ensure a perfect transfer of HD-SDI 1080p signal. Perfectly works with Composite Analog Video signal. Impedance - 75 ohm. This underwater bulkhead connectors fit into M16x1.5 threaded port or 0.625" (16mm) hole through, NOT for M16x1. Length of the coaxial cable, or other type of connectors are available.

* Underwater Micro HDMI bulkhead connector (right angle Type D) is designed to transmit the signal 1080p60 from the HDMI output of the camera Sony RX100II / III; Sony A7R II, Panasonic GH4. This fitting with thread M14x1, compatible with video and DSLR underwater housings such a Seacam, Subal, Sealux
* Bulkhead connector has water block, which is allowing to keep vacuum inside of your underwater housing. Depth - 230 PSI (160 meters)
* Contacts: Gold plated, brass
* Protective cap is including
* Material: Marine Aluminum with Hard Anodizing coating

USB 3.0 Micro B cable is the latest technology available for the fastest and most reliable transfers. Cable allows you to download photo and video files from the DSLR cameras (Nikon D800; Canon 5DS 7D Mark II) to the computer, without opening the underwater housing or control some of the EOS DSLR cameras using V Control, CamRanger, Okii FC1 USB Focus Controller. Using Android device, you do not need a computer or laptop, simply connect your underwater housing and camera with USB 3.0 cable to your Android.
It gives you a capability to remotely control most of the common settings: focus and zoom control, capture, image and video review - and much more.
This USB 3.0 Underwater bulkhead connectors fit into M16x1 threaded port of Nauticam or 16mm opening Aquatica / Amphibico housing and easy to install. It comes with right angle male Micro B connector on the end. Bulkhead connector has water block, which is allowing to keep vacuum inside of your underwater housing, depth -  240 PSI (160 meters). Custom length is available. A protective cap is included. The bulkhead connector works with a USB cable DNC-1030 (cable sold separately).

For sale inquiries: info@diveandsee.com

Underwater Ethernet SDI bulkhead connector gives you full remote-control over many settings like Record and Playback control, shutter speed, look, curves, state metadata, lens and advanced preset system, frame rate, white balance, bit-rate, cropping, and HD Filters (The FoolControl App) of RED cameras. SDI cable transmit the HD-SDI signal from RED camera to the surface monitor for review.
GIG-E Ethernet connector of RED Epic Dragon, allows for external metadata ingest. It's comes with two cables: One is CAT5, fitted with LEMO 9 pin connector on the end, Second coaxial SDI cable with BNC connector. This underwater bulkhead connectors fit into M16 threaded port such a Nauticam housing or 16mm opening Aquatica / Amphibico housings. Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing, depth -  240 PSI (160 meter). Custom length of the cables is available. Bulkhead connector works with cable DNC-1038.

For sale inquiries: info@diveandsee.com

* DNC-2031 bulkhead connector is used for facilitating the transmission of LAN Ethernet data at speeds up to 1,000 Mbps (or to 1 Gigabit per second) between underwater systems
* Ethernet data underwater bulkhead connector with thread M16x1
* Material: Marine Aluminum with Hard Anodizing coating
*  Bulkhead connector has a water block, which is allowing to keep vacuum inside of your underwater housing
* The protective cap and security nut are included
* Contacts: Gold plated, brass
* Custom length and other connector types are available
* Depth - 240 PSI (160 meters)
* Compatible with LAN Ethernet Dive And See cables DNC-1101, DNC-1044, etc

Underwater Micro HDMI bulkhead connector (right angle Type D) is designed to transmit the signal 1080p60 from the HDMI output of the camera Sony RX100II / III; Sony A7R II. This fitting with thread M16, compatible with video and DSLR underwater housings such a Nauticam NA-RX100.
* Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing. Depth - 230 PSI (160 meter)
* Contacts: Gold plated, brass
* Protective cap is including
* Custom length and other HDMI connector types are available

LANC remote control bulkhead connector is designed to control some functions of the camera - remotely, without dealing with buttons on the camera itself. Bulkhead fit into M16 threaded port of Nauticam housings (or 16mm opening) and works with DNC-1080 Underwater LANC remote control cable (LANC cable sold separately). It's comes with flexible stranded conductors cable, fitted with a Right angle male 2.5mm phone jack connector on the end. With this fitting, can remotely control on Blackmagic Cinema Camera record starting and stopping, iris adjustment and manual focus adjustment. On Panasonic GH4 can use our cable with the shutter remote control DMW-RSL1.
* Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing. Depth - 230 PSI (160 meter)
* All contacts - Gold plated brass
* Custom length and other connector types are available
* Protective cap is include

For sale inquiries: info@diveandsee.com

Custom underwater HDMI bulkhead connector is designed to transmit the signal from the HDMI output of the camera.
This connector with thread 1/2-20, works with the underwater housings - Ikelite, Light & Motion Bluefin.
It is required to drill opening with diameter 0.5" (12.7 mm).
* Compatible with all Dive And See HDMI monitors and cables
* Bulkhead connector have: water block, which is allowing to keep vacuum inside of your underwater housing, depth - 230 PSI (160 meter), Gold plated contacts
* Protective cap and security nut is include
* Custom length and other HDMI connector types on the end are available

For sale inquiries: info@diveandsee.com

Underwater combo 16mm 3G SDI Bulkhead connector for Inventors
Underwater custom Bulkhead connector consists 3-pin male for 3G SDI Video signal (one coax SDI cable) and 12–pin male for power and data (12 colored stranded 24 AWG conductors).
Bulkhead connector fits 16 mm opening (such as Amphibico / Aquatica, Nauticam underwater housings) and has water block, which is allowing to keep vacuum inside of your underwater housing.
Depth - 230 PSI (160 meters).
*All contacts - Gold plated brass
*Custom length and other BNC connector types are available
*Protective cap and security nut is include

This underwater HD SDI Bulkhead connectors fit into 0.5"  port (or 12.7 mm opening) of Amphibico Phenom housing and easy to install. Compatible with Surface coax cable, such a DNC-1061 or DNC-1033
* Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing, depth -  240 PSI (160 meter)
* Contacts of the bulkhead connector, made from Gold plated brass
* Custom length of coax cable and other BNC connector types are available
* Protective cap and security nut is include

For sale inquiries: info@diveandsee.com

Underwater Mini HDMI bulkhead connector is designed to transmit 1080p signal from the HDMI output of the camera for underwater housing -Amphibico Endeavour for Sony HVR-FX7 and HVR-V1. Compatible with all Dive And See HDMI monitors and Surface cables such a DNC-1066 (which is allowed to extend HDMI signal up to 30 meters). This connector for 0.5" hole through.
* Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing, depth -  240 PSI (160 meter)
* Contacts of the bulkhead connector, made from Gold plated brass
* Custom length and other HDMI connector types are available
* Protective cap and security nut is include

For sale inquiries: info@diveandsee.com

Custom Mini HDMI underwater bulkhead connector, right angle (Type C) is designed to transmit the signal from the HDMI output of the camera. This connector with thread M16, compatible with video and DSLR underwater housings such Isotta, Nauticam.
* Compatible with all Dive And See HDMI monitors and Surface cables
* Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing, depth -  240 PSI (160 meters)
* Contacts of the bulkhead connector, made from Gold plated brass
* This bulkhead connectors fit into existing 16mm threaded port in your housing and easy to install
* Custom length and other HDMI connector types (Up, Down, Left, Right) are available
* Protective cap is include

For sale inquiries: info@diveandsee.com

Underwater Micro HDMI bulkhead connector (right angle, Type D) is designed to transmit the signal from the HDMI output of the camera Sony a9, Panasonic GH4. This connector with thread M16, compatible with video and DSLR underwater housings such a ISOTTA, Nauticam NA-GH4, Nauticam NA-A9.
Bulkhead connector have water block, which is allowing to keep vacuum inside of your underwater housing, depth -  240 PSI (160 meter)).
This bulkhead connector fit into existing 16mm threaded port in your housing and are easy to install.
* Compatible with all Dive And See HDMI Surface cables
* Contacts of the bulkhead connector, made from Gold plated brass
* Protective cap is include
* Custom length and other HDMI connector (Up, Down) types are available