ball mount adapter
This 1" (2.5 cm) BALL MOUNT ADAPTER will be attached to the housing with 1/4-20 stainless steel socket head cap screw. Adapter is made from corrosion resistant anodized aluminum and comes with Stainless Steel Washers.
*Display panel: IPS LED
*Four user-programmable function buttons
*Video Formats: 59.94Hz(NTSC); 50.00Hz(PAL); 24.00Hz (CINEMA); 1080/24p/25p;50i/50p;60i/60p;720/50p/60p;480i/480p; 576i/576p
*Brightness: 400 cd/m2, sunlight readable
*Depth Rating: 270 ft / 82 m, can use above water as well
*Weight: 3.54 lbs. / 1.6 kg
*Size: 7 x 5.5 x 2.36 inch / 179 x 140 x 60 mm
*Reverse polarity protection circuit
DNC-7A(H1) - underwater broadcast quality Video Monitor with HDMI input, works seamlessly with Sony Alfa A7R II, Blackmagic Cinema Camera, Panasonic GH5, Canon cameras, and any 4K cameras. Completely manufacture sealed design eliminate one most common problem – leakage of the equipment after the open close procedure. This is the monitor with resolution 1280 by 800, IPS type of the panel with 400 nits brightness, wide view angle allowed to see the color-critical picture without color distortion and contrast ratio 800:1. Weights of the monitor in the water is neutrally buoyant.
The Video Screen has full menu access. It is very rich menu futures. External push buttons help you navigate through the menu. Power ON/OFF switch, battery status indicator with five LEDs and 4 user configurable push buttons for most common functions, allowed user for quick access without scrolling through the menu. The advanced feature includes Peaking filter, Pixel to Pixel, Exposure, Screen marker, Check Field, False colors, Histogram, Scanning mode, Center marker, Segmentation, Zoom, Freeze and much more.
For evaluation of the focus, the monitor has Pixel To Pixel future.
Camera mode – is designed specifically for DSLR cameras, like Canon 5D and 7D. These cameras when on record or live view mode, output HDMI signal have different aspect ratio. Camera mode is compensated differences between record and life mode.
Peaking filter or Focus Assist – will turn an image to mono and give you color outline, when a subject in a focus. Another mode of Peaking filter switch image to the full-color stage and be able to see an image in color outline.
Sealed Monitor
Appropriate bulkhead connector (1/2x20; M14; M15; M16)
Metal and Plastic protective cap
Cold shoe ball mount
Quick charger
Sun shade
Aquatica | Nauticam |
Amphibico | Nexus |
Equinox | Sea & Sea |
Hugyfot | Seacam |
Ikelite | Sealux |
Light & Motion | Subal |
Underwater camera Nauticam Sony RX100 with DNC-7A(H1) monitor
Top
Removable Sun hood greatly eliminates glare in shallow water, outdoor viewing and protects delicate monitors from the elements. Constructed of durable plastic can stand up to the rigors of use in the field. Spare screws include the monitor kit. Monitor hood easy to install.
Compact 179 x 140 x 60 mm, rugged, safe design. The monitor guarantees NEMA 6 (IP 68). Strong and lightweight aluminum shell, over hard anodized coating, two layers of the special paint, resistant to salt water, a perfect tool for professional underwater photography. The monitor is sealed and cannot be taken apart or opened. You will never get water or sand inside, or have to worry about properly sealing the monitor after charging it.
Top
The set includes a detachable mount adapter, allowing the underwater monitor to be tilted and rotated, with 1" ball on the end.
Binding T-slots on the top and bottom allow convenient connection with underwater housings and arms. It is useful for lighting or an external microphone.
Top
We have bulkhead connectors (fittings) for all brands of the housings. To chose your Bulkhead, see our Connectors production line. Custom length and other HDMI connector types are available.
All of our bulkhead connectors have water blocks and are open face pressure rated to 150 PSI (100 meters). Bulkhead connector comes with a built-in water block, open face pressure rated - 100 meters. Water block will protect keep the vacuum inside of the housing when using AirLock Vacuum System. Also protect the housing against penetration of the water, if something happening with external cable or connection between the cable and bulkhead connector. The DNC-7A(H1) has a detachable HDMI cable for a quick connection with a bulkhead connector on the housing. The unpluggable cable is convenient for transportation
On the picture, M16 bulkhead with right angle Mini HDMI connector (Type C) on the end, for Aquatica, Amphibico, Nauticam, Aquatica housings, Canon cameras, Panasonic GH4
We have also custom made HDMI Right Angle bulkhead connector (Elbow connector) for a hole with a diameter of 0.5".
This connector was installed on Light & Motion Bluefin Housing on the front plate of the housing.
Top
Option 1 (standard)
Built-in rechargeable UN/DOT 38.3 Certified Li-Ion battery with Battery Status Indicator.
*The flashing mode tells you when the battery needs charging. The charger is capable of 110V-240V input, allowing it to be plugged into power outlets in a number of countries.
*The charging battery port has also water block and electrical protection circuit, in case if you forget to put back Protective Cap after recharging the battery. Water will not penetrate inside of the monitor and do not destroy charging contacts of the port.
*The Check button on the monitor turns on a LED display showing the battery charge level.
*Continuous run time of HDMI version - 5 hours. *Recharging time of the battery - 3.5 hours.
Option 2
No battery inside.
*Power for the monitor is going through the separate cable from your own power source (DC 7.5 ~ 18V).
*Power consumption of the monitor: 7.3W
*The monitor has reverse polarity protection circuit (New feature).
*This circuit will prevent damage to the monitor, in case if you by accident connect in the wrong polarity.
Option 3
Custom power configuration.
Top
The Switch Guard design of the power button protects the monitor from self-activation during transportation.
All push buttons made are from non-corrosive steel.
Peaking filter Camera - Photography mode. Using 5D2 or 550D and other similar camera,
Pixel to Pixel Contrast
Exposure Brightness
Screen marker Saturation
Check Field Tint
False colors Sharpness
Histogram Color Temp
Scanning mode Picture Mode
Center marker Aspect Ratio
Segmentation Image Flip
Zoom H/V delay
Freeze Reset
Top