Archive | June 2015

Underwater LANC remote control cable and fitting

We release a new set of LANC remote control cable and bulkhead connector.

Water proof LANC Remote Control DNC-1080 cable is designed to control some functions of the camera – remotely, without dealing with buttons on the camera itself. Cable works with DNC-1050 LANC control bulkhead connector. The cable comes with flexible stranded conductors (up to 20 feet long), and standard 2.5mm Female Jack on the end. With this cable, can remotely control on Blackmagic Cinema Camera record starting and stopping, iris adjustment and manual focus adjustment. On Panasonic GH4 can use our cable with the shutter remote control DMW-RSL1. Custom length and other connector types (3-pin male 2.5mm connector) are available.

2.5mm 4-Conductor Female Jack zoom 20 feet underwater LANC cable diveandseee lanc fitting for nauticam gh4

LANC remote control bulkhead connector is designed to control some functions of the camera – remotely, without dealing with buttons on the camera itself. Bulkhead fits into the M16 threaded port of Nauticam housings (or 16mm opening) and works with DNC-1080 Underwater LANC remote control cable. It comes with flexible stranded conductors cable, fitted with a Right angle male 2.5mm phone jack connector on the end. With this fitting, can remotely control on Blackmagic Cinema Camera record starting and stopping, iris adjustment and manual focus adjustment. On Panasonic GH4 can use our cable with the shutter remote control DMW-RSL1.  Being a manufacturer allows us to provide custom variations (1/2 x 20; M12; M14; M15; etc) of the underwater bulkhead connectors. All of our bulkhead connectors have water blocks and are open face pressure rated to 150 PSI (100 meters). Custom length and other connector types are available. The protective cap is included.

2.5mm 4-Conductor Female Jack underwater 2.5mm 4-Conductor Female Jack underwater fitting diveandseee lanc fitting for nauticam gh4 housing